HP LaserJet P3005 Printer "shoot blank paper" Questions

...paper cassettes, it reverted back to the 4 lights and no print on the page. I have turned it and the computer on and off several times; and run through the trouble shooting system. I tried ...

...blank paper When I click on "print" my printer shoots out blank pages and won't stop. It gives this message: "paper too narrow." I am using the same 8 1/2 by 11 paper that I have always used, so the ...

blank paper. Help? try to print anything from your pc if its working that means you have something wrong with scan unit,but if its blank too make sure that your copier has toner and get yourself a new

...blank piece of paper after another, until I hit the cancel button of the printer. First verify that the printer is working by printing a configuration page from the printer itself. If it prints fine, ...

...blank sheet of paper between printed pages Every time I print a document, a blank page shoots out. If it's a multiple page document, a blank sheet comes out between every printed page. Check your ...

blank paper constantly. Will not print. Just shoots paper out. deskjet 920c will not print, green light flashes and blank paper comes out. Printer will print test page perfectly. You may need to go to

...blank paper with the same instructions. " Mismatch, replace media with plain paper." I powered it off, then back on with the same results. same EXACT thing mine does! HELP someone, anyone?? any ...

...paper comes out almost blank. A grey box from the original consistantly copies but nothing else. The printer copies perfectly if the paper type is set to Photo paper. It also scans and prints ...

blank paper when we print some thing out and some times it will get jamed. how could i fix that. the extra page comes from the page setup.. the jamming comes from odd paper textures, or not 'riffling'

...up to 6 or 7, blank sheets shoot right through and out the back (I have removed the Rear Clean Out Door pending solution). Help! door Make sure the printer you are using is set as the default ...