...power up. If the switch is in the On position, it will constantly remain on. If the switch is set to the Auto position, when a signal is present the subwoofer will turn on and will automatically turn ...
Question about Yamaha Audio Players & Recorders
...switch to reset. Reapply power and check the performance of the high-frequency driver before continuing with the power reduced to a level that does not cause the poly switch to interrupt the signal. ...
Question about Mackie Audio Players & Recorders
...where I waited a month for repair (only after I called to see what was taking so long) and got charged $93 to replace the power switch with a generic one, which, btw, they had in stock all
...power switch is set to "off" Sounds like the grounds are screwed up. Try using a grounded wire for the subwoofer input. If that doesn't work, it sounds like something is internally screwed up, like ...
...or what Just plug it in to an outlet. The lights on the front should be red (or standby mode). When it gets a good sound signal, it turns green (that's when it's on). It does not have a power
Question about Velodyne Audio Players & Recorders
...power switch is toggled I have this problem with my CHT-10 Velodyne subwoofe. The darn thing will not work unless I turn off the power switch and then turn the power switch back on. Then it will work ...
Question about Wharfedale Audio Players & Recorders
switch you can usually hear after the power light goes on. (The auto power on function i'm not using) What could this be? faulty thermal sensor? http://wharfedale.co.uk/ I'm still hoping I can
...switch on power supply keeping quied ( only make answer sound after finger kick in driver -- and again quite ) . If it is driver mount servo unit problem where possible to buy . 2683 input ...
...power switch, which turns on automatically when an incoming bass signal is recognized. This power switch is the reason the speaker has an electrical cord, and when the switch is automatically turned ...
...for some reason my sub plays louder on these setting verse phase on 0 and lfe switch on normal i have power on subwoofer a little more than half also set croosover to 80hz you will never touch it ...
88 questions posted
Usually answered in minutes!
134 Questions
30 Questions
11 Questions
