Black & Decker drill as a result there is a drill stuck in it Try putting a vise grip on the bit,, and a big vise grip or chanel lock wrench on the key lock.. That should break it free.. Good luck
The part where you put the drill in is stuck open What you want to do is hold the tip of the drill firmly with one hand and pull the trigger with the other make sure the drill is in reverse though.
Question about Black & Decker Drills
Black and Decker corded drill won't tighten around a bit. I have a black and decker corded drill. I don't know the exact make and model but it says 7252 Type 1 on the side. The drill bit grip part won
Question about Drills
...black and decker quattro set. What is the name of the instruction manual for this 'quattro' set ? How can I get an instruction manual for this quattro ? I bought this reconditioned item from a black ...
bit is stuck. chuck wont open. turns but makes a bit is stuck. chuck wont open. turns but makes a clicking noise the chuck is broken inside if clicking. Ace and True Value stores sell chuck ...
bosch keyless chuck stuck The chuck on my drill is stuck. I have tried tapping it with a hammer, but it remains firmley stuck. I can wind the chuck jaws in or out, but the tightening ring stays fixed ...
black and decker 14v with chuck issues The chuck is stuck wide open and will not close or move.. there is a recall on them I believe.
I can't loosen the part where the drill bit goes in. It's stuck! Try using a large wrench to turn the chuck. It may loosen enough to release the bit
Has no power barly drills gets stuck when drilleig It appears that the carbon brushes are not making a good contact with the armature or they are badly worn
How do I remove a stuck bit from the chuck? put the drill in a vice. then use the chuck key and a hammer to release the bit. if necessary use wd40 spray to free up chuck.
86 questions posted
Usually answered in minutes!
227 Questions
165 Questions
118 Questions
74 Questions
36 Questions