Question about Drills
...18v cordless drill model 542995-2. Is that part available anywhere? I am looking for a chuck part no.3860001000 for a Mastercraft 18v cordless drill model 542995-2. Is that part available anywhere? ...
...18v cordless drill? You will find a screw inside the chuck that needs to come out first of all but beware that it will be a reverse thread. This is to stop it loosening whilst in use. then you will ...
...cordless drill 18v xrp my chuck bolt insid of the chuck wont come out and i need to know if it is reverse thred or not i cant say 100% sure for that drill but im betting its not. it probably has red ...
18v drill keyless chuck stuck The keyless chuck is stuck with a bit in it. The chuck will turn slightly with force, but will not open. Try holding the bit in a vice and gently tap the chuck off of the
bad chuck on 18w cordless drill cannot get chuck off can you tell me how to get it off? How to remove the chuck
...18v makita cordless drill , how do i fix it Put the chuck key on and strike it with a hammer counter clockwise. the chuck key must be properly seated in the hole. Once the chuck is brokrn free, you ...
...chuck on my Dewalt 18v hammer drill will not stay tight. it loosens whether I am in forward or reverse the chuck on my dewalt 18 volts hammer drill will not stay tight it loosenss whether i am in ...
...bits The drill uses a cordless chuck (part bits go into) you will need to hold the outside ring of the chuck and spin it to loosen the jaws on the bit. Then spin the chuck the opposite way to ...
removal of chuck there is no allen key in the center of the chuck this type of drill don't have any chuck screw in the center of the chuck.alos u need special jig to remove the chuck
...cordless drill has a double sleeve chuck. The current DC727 model has a SINGLE sleeve chuck. What are the pros and cons (if any) to the two chuck designs? Thanks. this 2 chuck are 3/8 jaw ...
245 questions posted
Usually answered in minutes!
165 Questions
118 Questions
74 Questions
36 Questions