cordless drill that when I try to charge the battery the red light goes from a slow to a rapid blinking after about 60 seconds. The battery does not hold a charge regardless of the time in the charger
when i charge my battery. my drill only turn slow.not fast enough to drill a hole. Change the batts first and try.If the problem persist the change the charger,
cordless drill...battery does not get a full charge Batteries retain a memory. If you only drain the battery half way and than recharge all the time it will only keep half a charge. Try running it all
charger the chargers red light would go out completely. Ian's solution worked like a charm. At first, I read his post to me I should connect a nine volt battery to the drill battery. That didn't work.
I just bought a DW735 planer and ran a 6" x 24" piece of 3/4" poplar through it, with the planer set to remove 1/16" of thickness. I used the speed 1 (slow). It ran through fine, ...
...drill. i suggest replace the spindle my impact driver is really slow. batteries are fine of course thats what i checked first, is something broken? had the same problem. You need to disassemble the ...
only full power for full trigger pull only full power for full trigger pull no slow speed I had same issue with Metabo hammer drill. It was faulty triggrer. Replace it and it shoul be fine. Juraj
180 questions posted
Usually answered in minutes!
227 Questions
118 Questions
74 Questions
36 Questions
