Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver "cordless drill won" Questions

cordless B&D on the floor and it went to pieces and I am looking for a manual to put it back together if it went to pieces when you dropped it, I'll just bet a manual won't help you, I'

...drill driver battery packs battery packs that wont recharge Rechargeable batteries do have a lifespan, they won't recharge forever.  If you have fully discharged the batteries then fully ...

motor spins chuck won't. there appears to be a noise like a loose bearing. Could this be a transmisson? THE MOTOR CLUTCH IS DEFFECTIVE

won spin and grinds. How due you remove chuck? You may have inadvertently hit the hammer/drill switch and it is floating the middle between functions. This selector switch has a symbol showing a drill

my dewalt 18v xrp battery wont take a charge Depending on how old or more to the point how many times you have already charged the battery, it may be worn out.  All rechargeable batteries do ...

...cordless drill 9.6V chuck will not come off shaft i removed the screw inside the chuck, but the part that closes around the drill bits will not close shut. preventing from pulling the chuck off the ...

Cordless Drill will not charge battery The charging capability in the drill does not work. Either the charging adapter is faulty or the battery is worn out. If the recharageable battery is more than 3

...drill. The chuck won't turn by hand to release the bit. Good Afternoon, Ladooudep55: I hope you have got your bit back, but if not, remount the drill chuch onto the bit, and drill in forward without ...

...Cordless Combi Drill - how do i actually put a drill bit in? Do I need to take off the plastic ring? The large black part of the chuck should turn left and right to extend (close) and retract (open) ...

drill wont run. Changed brushes still nothing. won;t come on all the time