Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver "cordless drill won 39" Questions

...cordless drill 9.6V chuck will not come off shaft i removed the screw inside the chuck, but the part that closes around the drill bits will not close shut. preventing from pulling the chuck off the ...

cordless B&D on the floor and it went to pieces and I am looking for a manual to put it back together if it went to pieces when you dropped it, I'll just bet a manual won't help you, I&#39

...drill driver battery packs battery packs that wont recharge Rechargeable batteries do have a lifespan, they won't recharge forever.  If you have fully discharged the batteries then fully ...

...won't charge up anymore.  If you have fully discharged the battery and tried to fully charge it up again and it won't take a charge or only lasts a few minutes on a charge it may be time ...

...cordless drill and lately when I pull the trigger it won't do anything. The lights work but it doesn't move. I have to give it a hit to make it work again.. What would b the problem??? The ...

...Cordless Combi Drill - how do i actually put a drill bit in? Do I need to take off the plastic ring? The large black part of the chuck should turn left and right to extend (close) and retract (open) ...

Cordless Drill will not charge battery The charging capability in the drill does not work. Either the charging adapter is faulty or the battery is worn out. If the recharageable battery is more than 3

...drill. The chuck won't turn by hand to release the bit. Good Afternoon, Ladooudep55: I hope you have got your bit back, but if not, remount the drill chuch onto the bit, and drill in forward without ...

motor spins chuck won't. there appears to be a noise like a loose bearing. Could this be a transmisson? THE MOTOR CLUTCH IS DEFFECTIVE

Drill won't reverse anymore. It still drives clockwise but not anti-clockwise (reverse). Any help would be deeply appreciated It sounds like the switch is bad. Not uncommon to loose either forward