Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver "drill bit slips" Questions

Ad

Question about Porter Cable Drills

1 Answer

...drills where designed for drill bits 1/8 and larger the 3/8 chucks are a little better with the smaller bits .Check your owners manual and see if they have a min requirement listed for the bit ...

Ad

...drill bit out,seems like the chuck itself is bad,any ideas on how to remove the drill bit? Sometimes if you happen to have the right size bit, it will stick into the bolt that holds the chuck on if ...

Ad

...Bit but can't secure in drill using L shaped tool.I have Topsey Turvy tomato planter to hang out on balcony. My E-mail is GiClm4@comcast.net If it's an inexpensive bit, odds are it's spinning in the ...

Question about Dewalt Drills

2 Answers

...bit to drill into ceramics eg tiles or bricks. if the plate is glazed it is better to stick some masking tape or adhesive backed paper on the area to be drilled to stop the drill bit slipping around. ...

...drill bit that slip. Take a pair of channel lock pliers, and try and turn the chuck counter clockwise. Do it sharply so the drill doesn't turn. IF that still doesn't work put the drill in reverse and ...

drill bit in? Do I need to take off the plastic ring? The large black part of the chuck should turn left and right to extend (close) and retract (open) the three chuck teeth that hold the bit in place

Question about Bosch Drills

1 Answer

...bit in the chuck try to jam the chuck so its open. Put the forward and reverse so that it is slipping (like a grinding gear sound) and hold the drill upside down. If that doesn't work ,buy a screw ...

how do you stop a drill bit from slipping in the chuck Tighten chuck.

bit from the drill chuck. But slow and steady is the key, don't hit anything too hard, so as to not damage the chuck in the process, nor break off the bit in the chuck. You'll need to put the bit into

BIT SEEMS TO BE SLIPPING WHEN I ATTEMPT TO MORTISE WITH AN ATTATCHMENT TO MY DRILL PRESS/ DO I NEED TO BUY A DIFFERENT CHUCK? MY OCTAGON SHAPE ENDED BITS DONT SLIP. OR AM I DOING SOMETHINTG WRONG? You

Not finding what you are looking for?
Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver Logo

180 questions posted

Ask a Question

Usually answered in minutes!

Top Dewalt Drills Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Lance Guthrie
Lance Guthrie

Level 1 Expert

18 Answers

Spud Howell

Level 2 Expert

66 Answers

Are you a Dewalt Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...