hammer drill It could be the contacts on the switch are burning out. The 92 also had an electronic speed regulator that could be going out. After you run the drill and it stops. Unplug the drill, take
makita dril 18v stopped working Batteries are charged. Light comes on. just stopped working while I was drilling a hole in the wall. check switch it may have over heated and burned out
...Hammer drill cause battery to burn, I'm talking flames and smoke. Motor run in both direction. I hope this drill is still under warranty as the battery is in serious trouble. As long as the motor is ...
dw999 hammer drill not getting up to speed your engine is burned buy a new one.
...hammer drill and was drilling holes in concrete drill stopped working and a new battery started to smoke and almost caught fire. The drill no longer works, the reverse switch does not move. You have ...
sparking and burning coming out of the motor. dust build up inside casing. crack open and blow out with compressed air hi there sounds to me you will need to change the brushes inside these are easily
...hammer drill is stuck in forward and the button will not change to off or reverse. As soon as I put in a battery off it goes. Also one on the 14.4 drills will only go into reverse and offf too. Well ...
...burning smell bad performance and left drill sitting for few minutes and it got hotter and hotter and battery started getting hot till I removed it also throttle switch feels not normal.....it's the ...
...burning smell.. Drill no longer works. I have had the set for just over one year and do not abuse my tools. Warranty service center told me without even asking what I used the drill for that I ...
...drill or what? Any of those things would suggest a pinched wire or broken switch. Make sure the switches for reverse and hammer work in both directions. You say it is relatively new and there is no ...
180 questions posted
Usually answered in minutes!
227 Questions
118 Questions
74 Questions
36 Questions
