Question about Sears LiftMaster Building Materials
...gear drive sprocket that meshes with the worm drive? my gear is not engaging any more If your drive gear is not meshing with the worm gear it is because it is worn out. You'll need to replace it post ...
Question about Sears LiftMaster Building Materials
...drive gear twice Chamberlain garage door opener I replaced the drive gear last year and now it is broken again. I noticed the door was raising very hard a couple of months ago and that the rollers on ...
Question about Sears LiftMaster Building Materials
the worm gear spins but does not turn main gear... The worm gear spins but does not turn main gear The drive gear must be stripped.
open and then recloses? Thank you A broken door spring or a bad drive gear could cause this problem. The drive gear is a white nylon gear just in front of the motor and it will be obvious if it is bad
Question about Sears LiftMaster Building Materials
...drive gear. It is a white nylon gear just in front of the motor. It is possibly stripped. This is a good time to release the door from the opener and operate it by hand to see just how heavy it has ...
Question about Sears LiftMaster Building Materials
You need to check your door springs and the drive gear. You may have a broken spring or your drive gear may be stripped. Remove the cover from the motor unit and it will be obvious if the gear is bad
...but that isnt the problem. It is coming from the screw drive gear connection. How do I solve this? You can squeeze the ends of the drive shaft cover to remove and check for looseness of that
Question about Sears LiftMaster Building Materials
...drive/worm gear My liftmaster 1245R does not work anymore. Need to replace drive/worm gear. How can I change it. thanks, I have a 1265 and took the cover off (unplug first). There are screws securing ...
Question about Sears LiftMaster Building Materials
...drive gear. If this is the case follow the instructions below. You probably did not have the motor shaft pushed all the way back when you tightened the coupler after replacing the worm gear. Loosen ...
Question about Sears LiftMaster Building Materials
...drive gear large? The door sensors just point at one another. They each have a small light that should come on when they are properly aligned. It isn't really critical. If both or neither light comes ...
5,971 questions posted
Usually answered in minutes!
0 Questions
