Dewalt 7.2-18.0 Volt One Hour Charger "open" Questions

...hold the black part of the chuck with one hand and turn on drill with a bump and the chuck will open. then insert bit. if you feel chuck not open reverse the switch and it will

...can i remove the chuck from my cordless dewalt power drill Hello, W/D here. To remove your chuck, open the jaws of the chuck fully, but don't open them so tight that they lock in the open position. ...

bit tighten stuck open If you mean the chuck jaws seem stuck open, spray around them with some penetrating oil or spray like WD-40, RP-7 or similar and let sit for a couple hours... Then you can tap ...

Keyless chuck won't open to put drive bit in. I need to put the drive bit in so I can put an attachment on, but the chuck won't open. Any ideas what I'm doing wrong? Hi Leslie: Give this a try and see

My chuck key on my Ryobi Cordless drill/Saw Combo, is stuck in the fully opened position and will not tighten at all. Was working for a while then just happened. Thanks ahead of time. It's just jammed

Cordless Drill, Keyless Chuck stuck in full open position. Black and Decker Cordless Drill, Model # CD140G, Date Stamp 20041952. Keyless chuck is wide open and stuck, won't budge. Any remedies? Thanks

taking it apart and using a hair drier on a medium heat to dry out the components. even if you just open it up and let it air dry a few days you may be able to save it. in any case you have to open it

I have a Black & Decker LI4000 smart driver that needs a new battery. I can't figure out how to open the case to remove the battery. After removing the screws, the case will open until one gets to

chuck is locked in open position Craftsman cordless drill. The chuck is open completely and I am unable to release it so I can tighten a bit. Yesterday, I was opening it completely up and then it got ...