Question about Mitsubishi WD Televison & Video
Let me know....tks The lamp must be reset when replaced. Check the owner's manual on how to reset. I had a similar problem and I was instructed to reset my lamp with a few TV remote control functions
...lamp button on the front of the tv turns orange. i have to hitthe reset button to try again. it does this over and over. every once in a while it get a picture, maybe after 8-10 tries of getting the ...
Question about Mitsubishi WD Televison & Video
...Reset 32 Lamp Cover open 33 Air Filter Cover open 34 Lamp abnormality 35 Chassis Fan failure 36 Exhaust (Back Cover) or Lamp Ballast Fan failure 37 Engine (DMD or Lamp) Fan failure 38 Excess Lamp ...
Question about Mitsubishi WD Televison & Video
...reset lamp timer on Mitsubishi DLP TV? My TV will not come on now after lamp replacemnent. I cant find the solution to reset my lamp hours, I replaced it, unplugged the tv like i was supposed to to. ...
no picture, just sound then it turns off. Try to check the lamp if damage, replace the lamp after you replace the lamp, don't forget to reset the lamp hour meter good day and best regards.
Question about Mitsubishi WD Televison & Video
How to reset lamp timer on mitsub model wd 82838 dlp tv? it is done thru the customer menu with the original remote
...reset it, nothing happends. the green power light blinks for a while, then shut off itself. when turn it on again, I can hear the fan is working, the power light is green, but it shuts off after a ...
Question about Mitsubishi WD Televison & Video
lamp door,make sure u don't hit the blue reset switch button and close the door properly and make sure screws it in to fit correctly and tightly.Follow these steps,should get ur tv back up and running
...lamp is on, as I can see by looking at the wall behind the TV and feeling the warm exhaust flow. But I get no picture -- not the menus, not from the broadcast TV (although I have sound) nor from the ...
Question about Mitsubishi WD Televison & Video
...reset, and the same thing happened. I examined the lamp and it appeared fine. I pressed the Menu and Input buttons together and the error code is 12(No error detected). When I turn the power on the ...
100 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions