GE Profile WPRE6100G Top Load Washer "loading switch" Questions

maytag top loader won't agitate. will fill and spin Hello, Try this: When the washer should be agitating, try turning your load size switch back and forth a few times. If you are on a medium load, ...

I have a whirlpool ultimate care II that won't fill with water it just starts agitating. Sometimes if you hold the load size switch in between load sizes it will start filling but you have to hold the

low water level in top load washer we have a ge top load washer and the water level is too low to cover even a regular load Load selector switch has a hose attached to it that goes to bottom of washer

Out of balance switch will not stop washer when load becomes out of balance. Model MAV8600AWW Washer loads seem to become out of balance easily. Shut down switch does not stop washer when out of ...

My kenmore 22442100 top load washer will not stop filling I have to watch it and manually stop water and advance timer past fill cycle please help advise. your load select switch, has a hose connected

overfills with water Load selector switch is either plugged or needs to be replaced. There is a tube connected to load selector switch and goes to washer tub. Disconnect from top and blow out, gets ...

My Kenmore frontload washer Model 417 sometimes sticks in the fill cycle and will not advance.It will stay that way for hours just running water.If I advance the knob just a bit it will continue as ...

Washer will not spin r drain model whirlpool la7680xmwo Sounds most likely a broken/defective lid switch. The lid switch on a top-load washer is a safety switch that detects whether the top-load ...

why does my maytag centennial agitate while it fills The symptoms you are describing are most likely caused by a bad load sensing switch. The relay in the switch sticks and allows the washer agitate ...

Where is the load switch located Hi James. goto this link and have a look see if it helps you out. ...