Question about Fisher and Paykel Washing Machines
...Error Code 49! can i swap the hot and cold valves to make it work and disconect the hot valve?? and love this site very informative, Thanx Guys.. Error 49 comes up please help thanx The most common ...
Question about Fisher and Paykel Washing Machines
Error Code 49 on Fisher & Paykel Intuitive Eco I have googled error 49 and it said it could be the hot or cold water valve. The hot water valve was swollen so I replaced it and my washing machine ...
Question about Fisher Washing Machines
...error code 49? GW712 shows an error 49. I swapped the cold water valve to the hot one, as it had never been used connected the cold water wire to the hot side of the valve and it stll came up with ...
...error code 49 on wash cycles and error code 245 on spin and spin and rince cycles. All the water solenoids have a resistance of 58 ohms. I have cleaned the pump motor and measured the resistance ...
Question about Fisher and Paykel Washing Machines
Error Code 49 Fisher and Paykel Washing Machine My washing machine has an error code 49. I discovered that the cold water inlet valve was swollen so I removed and replaced it with a brand new one. The
Question about Fisher and Paykel Washing Machines
error code 49 on my aquasmart what is this at beginning of wash it doesnt fill up with water Code 49 is a cold water valve is faulty. Action: check the valve coils are not faulty (open circuit
Question about Fisher and Paykel Washing Machines
Intuitive Eco - code 49. What does that mean? Machine wouldn't start - just keeps repeating code error 49 faulty cold water valve, if that doesnt fix it then fault computer board
Question about Fisher and Paykel Washing Machines
error code 49 on fisher and paykel 8kg aqua smart washing machine, model number: wl80t65cw1. What does this mean? Hi just read your posting.Error code 49 means the computer has measured a voltage from
...Error code 49 means your cold water valve is faulty,The valves are located under the top panel.Do you help in the step by step testing of the valves?If you do please reply and I can help you rectify ...
error code 49 f&p aqua smart wl80t65c 49 is a cold water valve fault. test the valve for voltage while filling, it should be recieving 24V. if not, the problem lies with the motor controller.
629 questions posted
Usually answered in minutes!
45 Questions
