my washer keeps stoping and saying f1 F1 error code means that the control board has a failed component on it and needs to be replaced. Heres a little tip though due to so many of these control boards
Question about Whirlpool Cabrio Washing Machines
I have a whirlpool cabrio washer and after a power outage it will not light up or start If you have power to the outlet and the machine does not power up then the control board is fried. All the newer
WHAT DOES CODE F51 MEAN ? The F51 error is a RPS (rotary position sensor) board failure where the control board looses contact with the RPS during the machines operation. The RPS uses hall effect ...
Question about Whirlpool Cabrio Washing Machines
on my whirlpool cabrio washer an F1 warning light comes on and washer will NOT work. F1 is the control board failure and you need to replace the control board inside the machine that controls the ...
F1 Code. try unplugging it for a while to reset the control board,if this doesnt work then theres a bad control board or interface keypad,you will need to run the diagnostics from the sheet located ...
Power Switch - Washer The electronic power switch has stopped working - well it works intermittently and my kids just keep jabbing until they get it to turn on. Can I replace the switch? How much is ...
Question about Whirlpool Cabrio Washing Machines
WHY IS THE MACHINE SPINNING AND FILL WITH WATER AT THE SAME TIIME This is a known control board issue with the Cabrio. If your unit still under warranty? If not, you will need to replace the control ...
Question about Whirlpool Cabrio Washing Machines
whirlpool cabrio top load, has flashing dial and 51? also an F?? The F51 error is a RPS (rotary position sensor) board failure where the control board looses contact with the RPS during the machines ...
Question about Whirlpool Cabrio Washing Machines
i bought second end whrilpool fully automatic washing machine not working Can be several reasons, starting from the power supply to the control board, if there is no action on the control board then ...
Question about Whirlpool Cabrio Washing Machines
When I start the machine it starts to fill up and then it stops and on the dial it displays F and I can't find my user guide help please>>> The F1 error code on Whirlpool Cabrio Top Load ...
3,787 questions posted
Usually answered in minutes!
57 Questions
48 Questions
24 Questions
12 Questions