REMOVE AGITATOR FOR GE MODEL# WNSR3100WOWW I DISASSEMBLED MOTOR, SUPORT RODS FOR TUB,PUMP, CAN AGITATOR STILL BE REMOVED, AND HOW? The agitator simply pulls off. Sometimes they get stuck. Is that what
...old son dropped a refrigerator magnet in our clothes and now the magnet is under the agitator. How can I remove this to retrieve the magnet and not stop up the drain? Pull up on the fabric softener ...
...old then the agitator just pulls out, remove cap, if no bolt, just grab hold and lift up hard...picture. You can also clean the drain hose as that might be clogged if the agitator is fine. Hope this ...
old Kenmore 80 series washer with a sheet stuck under the agitator. How do I get it out? Why is it in under there? remove agitator top remove 7/16 bolt to remove agitator. tub mounting hub may be worn
agitator off, I was able to clean all of the old built up detergent and fabric softner with some old fashion scrubbing. Then I used some CLR to get what ever I missed. I pushed the agitator back until
Remove the coupling and replace it with a new one. Replace the agitator. If the agitator is hard to remove,use a old leather belt under the agitator to pull up on. Watch your nose when it comes loose
the bottom. Take the top and turn it upside down to remove the platic interior part that holds these 4 dogs. REMOVE the old dos and replace with new and do a reverse engineeriong putting agitator back
...old Kenmore Series 916 stacked Washer / Dryer combo. Is it dead or can we remove the agitator to get the shirt? Hold the agitator steady and the very top end will screw off. If very old it will be ...
...old machines. if you take off the cap at the top of the agitator and there is no bolt, then you can just pull the agitator off. it will likely be hard to remove, stuck with built up soap scum. use a ...
...****** it apart and remove the old worn out ...
205 questions posted
Usually answered in minutes!
196 Questions
47 Questions
55 Questions
45 Questions
52 Questions