E-Machines W6409 (7234) PC Desktop "slot" Questions

running a 1 gig stick and a 512mb stick, system only shows 896mb, apparently not recognizing all of the ram installed? I assume that you've booted the computer with _ONLY_ the 512MB stick installed, ...

I would like to add ram, do you know how many slots and how much memory I can add to this computer? Thanks, Cyn Your machine supports, DDR2 SDRAM or (DDR2) type Ram, maximum 2GB and has two Ram Slots.

I have an emachines W6409. I can add one DDR2 PC2-5300 1GB (PNY) to either memory slot along with the original 512MB in the other slot and all is well. Also, one of the DDR2 PC2-5300 1GB (PNY) in ...

Where is the Video card slot on a w3052 Emachine? Friend, first slot below the processor

...do I place the card? Yes. On the front of your machine about 1/2 way down, you will see several slots for different media cards..Once you place the card in, your PC will automatically recognize ...

...recommend that you be aware of ESD and its potential hazards Remove the memory modules from their slots. Take the opportunity to clean the slots on the motherboards and the memory module

...output other than vga Newer e-machines use the integrated graphics cards, but do not have expansion slots for anything else. unless you have an expansion slot for a video card add on. According to ...

...but what you can upgrade is the video card. you need to purchase a video card that goes into a slot in your emachines. Most slots have pci,agp,pci-e ether the case the only thing you need to ...

...of your system as you run increasingly demanding software applications in the future. Each memory slot can hold DDR2 PC2-5300 with a maximum of 1GB per slot If I could be of further assistance, let ...

..., but my computer will not recognize the additional memory. I tried swapping cards between the two slots , nothing . The specs say the motherboard can handle 1GB per slot - 2GB total . That's what I ...