Dyson Bagless Upright Vacuum DC41 Animal "ball cover" Questions

...ball shell cover on a DC41? cover fell off, looks like the piece in the middle that holds the cover on is cracked. Replace the ball shell assy PN DY-920772-02 and the yoke service assy PN DY-92352-01 ...

...wires. When looking at the front of the vacuum, the gray covers located on the right side of the vacuum. 1 big cover with a black rubber gasket and other small gray cover is on the rotating ball

Ball won't rotate, you may have the filter cover fitted incorrectly - please see the video below to ensure the HEPA filter and filter cover are correctly secured in place. If this doesn't help

cover not a difficult fix. Unplug the machine and remove the 4 torx screws and an access panel at the side of the ball. replace wires with new or re-connect with a splice. ensure wires are long enough

...the right side of the vacuum. There is one big cover with a black rubber gasket and other small gray cover is on the rotating ball area. See full details with photos at: ...

...the Dyson around as the ball doesn't roll Make sure the filter cover is on properly. If you can't see what is restricting the ball from turning. You might have to take it to a Dyson service

...wires. When looking at the front of the vacuum, the gray covers located on the right side of the vacuum. 1 big cover with a black rubber gasket and other small gray cover is on the rotating ball

...of the vacuum, the gray covers located on the right side of the vacuum. 1 big cover with a black rubber gasket and other small gray cover is on the rotating ball area. I hope this solves your

...board is located under the gray covers on the right side of the vacuum. There is one big cover with a black rubber gasket and other small gray cover is on the rotating ball area. See photos at

...DC41 The ball shell screws on the bolt sticking out of the side of the vacuum. Remove the little cover and twist the ball shell back on the bolt. Sometimes he bolt breaks off and needs to be