Whirlpool ED2FHEXN Side by Side Refrigerator "test optics ice maker" Questions

...optics boards one receiver one emitter on either side of the door opening which shoot a beam from one to the other through the opening in each side of the bin,as long as nothing blocks that beam and ...

...ice,checked optics ,good ,water valve coil tested good, no restrictionsbut i get no water in tray,also freezer temp is 8 degrees. OK you mentioned the ice maker had no cubes or not making cubes, try ...

...optics test On page 28 of the file if your refergerator was manufatured in 2002 or after. Otherwise use the test on page 26. Thee is a possibility that if the optics path is clear and it continues to ...

...ICE MAKE NOT WORKING - PERFORMED TEST AND FOUND THAT THE OPTIC SYSTEM IS NOT WORKING ON LEFT SIDE OF INSIDE FREEZER WALL. THE RIGHT SIDE CONTINUES INFRARED FLASHES WHEN TESTED. Hi, The part you need ...

...one tray ????what is going on ???? there is a switch inside at the top of the icewell some models it is mechanical and some it is optical it detects the ice well is full locate the switch and test ...

...ice maker still does not work. How can I test the emitter and receiver boards. The connector on the left side (P/N 2220398) has 4 wires (black, brown/white, Orange/black, white) and the right side ...

...Optics test is good proceed to the the ice maker functional test on page 29 and note the jumper wire required As for the water valve see this link: ...

...optics check out fine. Tried to run harvest cycle. Runs through cycle but won't fill with water. Water solenoid checks out fine (I'm an elect engr and just jumpered it it to test). The water line is ...

...optics components are okay, then the next step would be to check the ice maker module. The test procedure for the ice maker module is provided in the second image below. This test requires placement ...

...ice maker is on,that literally cooked,evidenced by heat swells on the interior of the plastic wall,and the upper tray having melted near that corner. How do I take apart the interior of the freezer ...