Question about Jensen Car Audio & Video
...toggle switch and put the red wire from the togglt to the skinny yellowish or greenish wire and put the black from toggle to black from your car and deck flick it and watch whatever you want when you ...
...trying to bypass switch can i just use the toggle switch on the pink wire. and flip it off to on and make it work. Yes, this unit will work with a toggle switch. Do you no the passcode for this ...
...toggle the green wire away from ground (from Low to High - i.e. momentary switch) so the radio sees the rising edge of the 12Vdc signal. The green wire is normally high and is tied low. When you put ...
...toggle switch and run the wire that normally goes to the brake, into one end of the toggle. Then run a wire from the other end of the toggle to a ground. Whenever the message comes up on the screen ...
...toggle switch took care of the problem. Could someone break that down for me step by step? Thanks! did you try connecting the bypass wire to the ground wire? Go from the brake wire on the Dual to a ...
Question about Jensen Car Audio & Video
...toggle switch and ground a wire from the neg end of the toggle switch.The PAC controller is way more convenient because you dont have to flip the toggle switch 3 times everytime you get in the car.I ...
toggle switch.connect the brake wire from your radio to one side of the toggle swith and the other side of the toggle switch will be connected to ground.then when your dvd comes on flix the switch for
toggle switch to get a normal and bypass mode switch, this can be wired of this way, the common pin of toggle switch to your video unit, at the other pin, it could be connected the parking break wire
...toggle switch is involved: 1 - connect e-brake wire from dvd unit to the switch 2 - connect a ground wire from switch to the unit chassis(any good metal grounding surface will do) 3 - pop in a dvd, ...
106 questions posted
Usually answered in minutes!
12 Questions
9 Questions
5 Questions
2 Questions