Whirlpool LTE6234D Top Load Stacked Washer/Dryer "dryers counter clockwise spin" Questions

...counter clockwise really slow at first, presumably to balance the clothes, and then starts to spin up clockwise (to do the spin cycle) but then whinnies and then stops....! did either of you fix this ...

counter clockwise manually but won't go clockwise. Help... I suspect maybe the drum rollers..because the drum sags a bit... but i can't find anything online about them for this model. Check inside the

...counter clockwise then u hear a click then it starts spinning and I also noticed a small drip from under the drum is that just a seal that needs replaceing any help would be great thanks my drier not ...

...counter clockwise. The thingy in the middle spins both ways. Whats going on with it ? I bought it in 2008 Hello Marjorie, thank you for your post! From the information you have provided water will ...

...counter-clockwise and remove it. Remove dirt and debris. Replace the filter and close the pump access door.Rearrange the clothing in the load. An unbalanced load can prevent the washer from spinning ...

...counter-clockwise....... maybe that is normal?????) Drains, after a quick click, it seems to drain normally Spin, the first time this actually works, the belt and all pulleys turn counter-clockwise ...

...counter clockwise then plugging in, nothing. I did notice if I turn the drum at a fairly decent speed the washer lights up, but when I stop it goes off. Any ideas of what I should try or ...

...counter-clockwise with the selector pushed in. It will spin off the shaft and then the outer indicator dial will pull off. The shaft also has a keyed slot that will only allow the dial to be removed ...

...counter clockwise ckd for anything that may be blocking pump or has pump impeller locked be sure to ck as far as possible into pump throat if impeller is locked pump can be removed and taken apart ...

...counter-clockwise to the second position from the bottom.Press and hold the Options and Cancel buttons simultaneously for 2 seconds. The control will enter test mode,the buzzer will sound 3 times and ...