Whirlpool LHW0050PQ Front Load Washer "check motor" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

...Check motor winding resistance at P6 of the motor controller (in the console). If an open circuit is found, this is an indication of problems with connections to the drive motor or the motor itself. ...

Ad

Question about Hotpoint Washing Machines

2 Answers

...motor area? Check for broken wires from the motor plug to the main control board. Check the main control board for signs of damage or burning. Check that all plugs are firmly seated on the control ...

Ad

...Dispenser Motor Check mechanical linkage from dispenser motor to the top of the dispenser. Check Wire Harness connections to the dispenser motor and Central Control Unit (CCU) Check Dispenser ...

Question about Washing Machines

1 Answer

...motor connections. 7. Visually check the mounting bracket and electrical connections to the motor and rotor position sensor board. If visual check fails,reconnect the electrical connections, ...

Question about Whirlpool Washing Machines

1 Answer

...motor connections. 7. Visually check the mounting bracket and electrical connections to the motor and rotor position sensor board. If visual check fails,reconnect the electrical connections, ...

...after main drive motor started, this error will occur. Check motor Check motor tacho Check all connections and blocks to the motor Check connections on the main control module Check main control ...

Question about Whirlpool Washing Machines

1 Answer

...check the motor and electrical connections by performing the Agitate and Spin tests under Manual: Motor. The following steps assumes that this stepfailed. Unplug washer or disconnect power. Check to ...

Question about Maytag Washing Machines

1 Answer

...check the motor, check for RPS on the right side (follow the brown wires) and under the motors rotor disk. Use allen wrench to remove the rotor and then the four bolts holding the motor stator to the ...

Question about Fisher and Paykel Washing Machines

2 Answers

...check the motor harness, connectors and motor for discontinuity. This can be done by taking a resistance measurement between phases of the motor harness at the Motor Control Module end. Nominal ...

Question about Whirlpool Washing Machines

1 Answer

...check the motor, check for RPS on the right side (follow the brown wires) and under the motors rotor disk. Use allen wrench to remove the rotor and then the four bolts holding the motor stator to the ...

Not finding what you are looking for?
Whirlpool LHW0050PQ Front Load Washer Logo

344 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...