...blinking light. It won't run out the full cycle and seems to pause permanently with "1" left on the counter. It will not spin out all the water and my clothes are soaked at the end of ...
...(1998) blinks C9 and says no centrifuging and pre-wash. Thank you J. 1) Hold in the Pre-wash & soaking buttons TOGETHER; 2) At the same time, turn the knob clockwise from the OFF position, to ...
soak, wash and rinse led light blink after pressing the play button and does not wash. The washer uses a green light, which is the "Start" button, to indicate problems, and the flash pattern is a code
...then makes a strange noise and starts blinking red lights. No error code... and no way to unlock. Soaking wet clothes are sitting in washer. take the kick plate off and put your and inside u going ...
SOAK error code will cause the HEAVY DUTY, NORMAL, and the HANDWASH cycle lights to to come on and the WATER LEVEL light to blink. The pressure switch contact selected has opened during agitation task
...to spin a few times and then stops. Water remains inside, not draining and all the clothes are soaked. The washer lights all begin blinking and it won't move into any other mode. we have been ...
Question about Whirlpool Washing Machines
soak BTW) 3) rotate the selector knob a few clicks until only the "done" led is lit 4) press start 5) the led's should blink again which leds blink tells you alternately the fault# and error# when the
...light. Hi from retired Englishman in SW France, (no promises but it's worth carrying this out anyway!) I would gently suggest as a first step that you clean the drain motor/pump lint tray/filter. ...
light constantly and the "71" is blinking. I did notice that the door latch mechanism on the door itself is loose. Is it supposed to be loose or could this be contributing to the unusual operations of
344 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: