...cotter pin came out with one rip cord. The other cord that should have had two cotter pins had none attached to it. Could there still be cotter pins attached some where? If so, what are they attached ...
...cotter pin ,but didnt find one,they are mounted to the frame just below the suspension plate ignore those cups with the pins those pins were the travel lock devices and the cotters were attached to ...
The tub is very loose and moves all about, even though I took it apart and noticed the pins and cotter pins had come out and I replaced all three? Not a solution but if the machine is "Oldish" or has ...
...another thing when you got the washer new you had to pull the shipping pins a yellow tab with three cotter pins if you still had them you would need to replace them before shipping you would need to ...
...the washer that is loose and it has cotter keys missing. please help! try replacing cotter pin first.if that dont don't work try to get a used timer to try before buying a new one.hope this
...this pin be and should there be a cotter pin holding it? the pin was used for shipping it is no longer needed.cannot think what you could of done but possible the triangular skate plate became ...
Question about Kenmore Washing Machines
...cotter pin, roughly 2 inches long made of brass. It is flat on one side to fit through a small hole in the underside of the base near the area where the motor, gear case etc attach. When I line the ...
I just bought a maytag washer and upon installation I can't get the cotter pin out. if you can get to it, cut the head or loop of pin and pull one side at a time out with pliers or vicegrips
...cotter pin,,,,,,,,,filled washer and it will not spin has humming noise like something is holding it where is the location of other two cotter pins There should be 4 - 1 near each leg.... all with ...
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions