...also have to check the inside of the clothes mover to make sure that the gear like cuts are not worn out. However another problem could be a broken motor coupler. Thank you for contacting ...
...allows the top portion to index. If the bearing or cams become stripped or damaged, the mover will often not work and the cam parts will have to be replaced. OR It may be a bad motor. Hope this
...do not recommend it Your model is a direct drive and pump has no wires. It is driven by the front motor shaft. If it is indeed spinning, then replace Pump. If it is agitating / washing but not ...
...MOVER RATCHET AROUND SLOWLY WITH NOISE BUT DOES NOT SPIN. I'VE CHECKED COUPLER---LOOKS FINE. MOTOR AND PUMP FINE--- REMOVED AGITATOR AND EXAMINED REPAIR KIT (DOG EARS) SLIGHTLY WORN WITH SOME PLASTIC ...
...the belt is slipping. Does it agitate for the wash cycle?When you get to the spin cycle, is the motor running and 3 pulleys underneath turning, and the tub is not turning?If so, I had this issue ...
...The clothes are wet after spinning When the clothes are wet at the end of a cycle, check these: Motor coupler Spin cycle Siphoning Water-inlet valve Motor coupler To test the motor coupler, ...
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions