...washer) have screens in them, they might be clogged causing the water to slowly drip in. the water leak is most likely caused by a rusted clamp loosing its pressure on the hose. the plastic component ...
...new one (floor model) and it agitates very slowly. The company that I bought it from says that this is normal on certain models. I don't have the model number with me at present but thought that I ...
...washer under the bolt or a new agitator ???? Hi just read your posting.1st thing to do is to undo the screw holding the agitator to the shaft and lift the agitator out.Then purchase some Loctite ...
Question about Kenmore Washing Machines
...washer does not spin at spin cycle. I took the back panel off and noted a kink in a belt just above the pump. Could that be the problem? Thanks if you can help with this condition It could need a new ...
Question about Maytag Washing Machines
...slowly. Additionally, when the spin cycle is over the drum does not stop spinning quickly but rather coasts to a stop. (around 18 seconds unloaded) Once stopped the drum can be spun by hand. If you ...
Question about Whirlpool Washing Machines
...slowly and makes a grinding sound on wash cycle. The agitator does not move at all on spin cycle but when the door is closed, a clickling sound is heard in the controls console. Also, how do you get ...
...new plug on the top of the agitator bell with the palm off your hand until the plug locks into place. 7. Place the agitator over the drive bell and slowly rotate the agitator until the notch inside ...
Question about Maytag Washing Machines
Washer fills, agitates very slowly, not enough to even clean. Leaks entire cycle. Does not spin clothes out totally either? Sounds like you need a new efficient front loader. With all the problems you
...washer. It just started making a grinding noise on the regular cycle and the agitator doesn't seem to be working properly, only agitates very slowly. Also When the cycle completes I have to put the ...
Question about Roper Washing Machines
NEW Roper Washer. It agitates somewhat slowly. My old washer agitated FAST. Is this normal for a Roper? I would have a look at the cam dogs located in the agitator and the motor coupler or belt if not
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions