Question about Whirlpool Washing Machines
...mover counterclockwise (by hand). The dogs and thrust spacer have been replaced. I've had this problem simalair to this and it always been the dogs. Could thid be the gear case or could the tub be ...
...washer has filled to the selected level, but the agitator doesn?t move, you will need to check the following parts. The agitator dogs. They are located inside of the agitator clothes mover. You will ...
washer had filled and agitated, but when went to spin produced a loud screeching noise. what might it be? this is an inglis front loader super capacity 2001. It may be a a worn or broken drive belt. ...
...washer has a hard time stopping making alot of noise remove the clothes mover/agitator and then remove the spanner nut located on top of the agitator and get the new drive block as this has worn out ...
Question about Whirlpool Washing Machines
...washer sounds like it is going to take off! Hi. If you hear an high pitched noise or rumble that becomes louder when spinning at speed, then you may have dislodged the drum bearing or broken the drum ...
Top half of the aggetater isnt conected to anything..it just spins around by hand..is this normal? if it spins freely only in one direction yes thats normal,but if both ways then the top part called ...
LG wm1832cw shaking bad in spin after move Hiya, The movers moved our washer, an LG wm1832cw, but neglected to use the shipping bolts that were on top of the washer. It is now shaking pretty bad in ...
...washer. It was in the rinse cycle. I then stopped it and put it on a delicate setting and the whine was not as loud. Since the cycle was almost over I mover the timer ahead to spin and did not hear ...
washer model lsr8233jq0. It was working fine until I moved. I think my "movers" might have damaged it. The tub will fill with water and it will spin but the tub won't drain. I don't believe there is a
...mover has problem.. need manual.. it spins freely in both directions.. Model # LSQ8000LQ1. The upper agitator has a set of dogs in it. They wear out. Replace them. Here is a video: I have more videos ...
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions