Question about Washing Machines
...bin with water. You must make sure the water level sensor is connected properly and working in order to resolve this. The sensor might need to be replaced even if it is attached and working properly. ...
Question about Whirlpool Washing Machines
...bin (and out the bottom of the machine) even once the power is cut off to the machine. The first time it eventually stopped on its own (after flooding our garage). The last time it stopped shortly ...
Question about Whirlpool Washing Machines
...ice bucket in the door is not dirty, a beam is sent across it to sense ice level and turn the maker on/off. Also clean sensors either side of the door inside with soap and water. make sure it is
...bin becomes overfilled? It has flooded 2 of my houses already!!! the washer doesn't have any features like that but you can put the washer in a pan with a drain or you can call youy plumbing supply ...
...level is too high. This sensor stops the ice maker from making ice that would overflow the catch bin. Check to make sure this sensor isn?t obstructed or locked at the far end of its travel. In normal ...
...bin was still spinning. Any ideas? HELLO, I HAVE A FRIGIDAIRE AFFINITY DRYER (AEQ6000CE32). WHENEVER I PUT THE CLOTHES IN IT JUST SPINS FOR 10 TO 15 MINUTES AND SHUTS OFF BEFORE THE ALLOTTED TIME. ...
...bin meet. trying to figure out if I can do this myself or should I call a pro..Thanks. You will need to remove the lower kick panel directly below the door to gain access to the inside cabinet to see ...
28 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions