Kenmore HE2t 3.7 cu. ft. Front Load Washer "washing machine stops minute left" Questions

washing machine (QuitePack2) which has never given me a problem in 3 years. Recently, the machine is stopping with 5 minutes left in the cycle and giving me a message of "F 2". Any ideas how

Wash cycle stopped with 3 minutes left. Door is locked and we can't unlock it. What should we do? You can open the door using the rip cord that is located under the service panel. While yall are ...

left. Can't get door open - load is stuck inside. Code is F-28. What do I do? Unplug the machine. Wait 15 seconds. Plug machine back in. Press and hold the Power button until the lights come on. Press

...your circuit breaker some times the htc fails all you get is machine stop because the heater is not detected if it spins rinses and empties in a timely manner then all thats left is the heater ...

...machine just flashes paus and minutes left.I removed all clothing , scooped out as much water as possible, tried to run the washer on several different cycles but to no avail. It seems the door will ...

...stops with 22 minutes left in wash cycle. Is there a way to reset the machine? Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To ...

washing machine stops about 3 minutes before the spin cycle ends leaving my clothes clean but very wet. There are no codes. It just goes through the entire cycle until 3 minutes from the end and shuts

Kenmore HE2 Dryer Does Not Autmatically Shut Off My Kenmore HE2 Dryer will not always cycle down and turn off. Most of the time the timer will stop at 21 minutes left and continue to run even though ...

...machine stops with 5 minutes left with message s or 5 d? "F21" is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a "SUDS" error may also be ...

...Washing Machine Close the door. Select any key (except stop), using the same key; Press/Hold-4 seconds, Release-4 seconds, Press/Hold-4 seconds, Release-4 seconds, Press/Hold-4 seconds, all the led's ...