Whirlpool LER4634J Electric Dryer "blower motor turning" Questions

Blower motor does not work, no heat. I took it all apart, checked for blockages, checked all continuity - all good. Drum turns, no air. Blower motor does not even begin to turn. If you check for ...

...entire drum will turn with it otherwise you could have a bad motor and a blower wheel this dryer has two motors,one for the blower and the other to spin the drum,and the blower motors were a

...old one to disconnect from the blower fan From inside dryer hold blower wheel with wrench that fits the squre part of blower wheel turn motor shaft clockwise should loosen the blower

...blower motor cover. Have someone hold the blower while you turn the motor shaft on the dryer motor using a 18 inch pipe wrench. Make sure that you turn the wrench to " Your Right " because the shaft ...

...motor shaft/blower shaft and turn wheel clockwise." Well, I don't even know how to get to the motor shaft/blower shaft. Help! Thanks!! I would start by taking off the top and checking the belt to see ...

...motor and blower separated The blower will be held to the motor shaft by one or two allen set screws. Loosen these screws and the motor will pull out. the blower fan will drop down so make sure you ...

Blower Motor not working The Blower Motor on my Dryer isn't working at all. When I turn on the dryer, there isn't any air coming out of the exhause vent. The vents have all been thoroughly cleaned. ...

...motor fan The blower fan on this model has reverse threads where it screws onto the motor shaft. At the small space between the motor and the rear wall of dryer you will see that the blower wheel has ...

...motor or the fan/blower. I can see air (dust) being blown around in the back of the machine so it appears that the blower is working. I don?t know if the motor drives both the drum and the blower, or ...

...blower off the motor shaft my dryer motor went bad (bearing)i got the motor loose just dont see what holds it two the n motor shafto the blower wheel is reverse threaded which means you have to turn ...