Weber Genesis Silver B Grill "manifold" Questions

Can't get male part of manifold fitting apart from female hose en Can't get male part of manifold fitting apart from female end of hose to replace regulator hose with new. Does Weber sell just the ...

...turned on full; and - When the back tube is turned on there is not enough gas pressure in the manifold to keep the front tube burning. I have: 1) a full tank; 2) a working regulator; 3) cleaned ...

...Millennium 4000 In most grills, the burner is "seated" on the valve, the valve is attached to the manifold, and the manifold is connected to the gas hose and

...(!) Now, I want to know how one can remove the broken valve body. Does it simply unscrew from the manifold, or is it welded to the manifold? According to the Owners Manual, it appears to be welded. ...

...the line to the propane tank? If you are talking about the hose that goes from the regulator to the manifold of the grill, just replace it. If you mean the manifold itself, you can take the hose from ...

...Any ideas would be helpful. Are you trying to remove the hose connection from the grill's manifold? Or separate the hose from the regulator? If it's the latter, give up that idea. It ...

...Do I need to add something like pipe thread compound or just screw the new valve's to the manifold and the rubber that touches the manifold forms a good enough seal? Thanks! I would

...nozzles pull away. If you ermove the control panel on the fom you should be able to slide the gas manifold back a little thus putting the nozzle into the burners. The manifold has a couple of

I have low flow on the first manifold (far left) on my napoleon 600. Removed and cleaned the manifold, no joy. Removed and cleaned venturi manifold and jet, still no joy? Have new tank and regulator ...

Can I change the manifold assembly myself Can I change the manifold assembly and the rear burner orifice assembly by myself and is it safe Yes and Yes