Saeco Odea Go "coffee machine brew group" Questions

...machine on. Close the service door. The brew group is automatically placed in the correct position. 2-Coffee grounds drawer is inserted. Remove the dregdrawer first, then the brew group. google "Odea ...

...coffee grounds drawer light were blinking alternatively. I did as the instructions said and turned the machine off then back on to no avail. So I removed the grounds drawer and brew group and cleaned ...

...brew group after cleaning. If you can remove the brew group easily, it should go back in easily. Make sure the brew group is in neutral position(2 arrows pointed to each other) and the latch behind ...

...machine. It seems to be jammed. Brew group stuck? Close service door and insert only the tall grounds container. Tilt it so it fits in under the flat coffee pat rejection scoop on the left hand side ...

...machine into lining up the spline so the brew Group will slot back in, but it will not 'reset' after switching off / on. Can you help please? Regards, Neil Hi Neil, Try to put the dregsbox and ...

...machine grinds and starts to pour the coffee but most of the water is sent to thedrip tray It is not the grind of the coffee (and, I didn't think you were using pre-ground). Mirko may be right, but ...

...coffee compacting in the brew group and/or a dirty brew group that gets stuck and does not cycle properly. First, you're going to need to get the brew group out. Check this out to get the brew group ...

...coffee or dirt a.d still no luck. This is the second time this happened. The first time I sent the machine back to Saeco and they sent it back fixed saying that it was clogged, but when they sent it ...

...machine - open the service door and see if u can tilt out the tall dregs container and remove it and the drawer. You need to get it past the coffee par rejector flap on the left of the brew group. It ...

Coffee grinds but nothing comes out of dispensing head. Brew group wont come out. The machine grinds but nothing comes out of dispensing head, machine also sounds a lot quieter at this stage. Brew ...