...Test Method: 1. Disconnect the refrigerator/freezer from the wall outlet for at least 30 seconds. 2. Turn the thermostat off. 3. Reconnect power to the refrigerator/freezer. Within 3 to 8 seconds the ...
...refrigerator/freezer is already in defrost, Test Mode can be terminated by unplugging the refrigerator/freezer from the wall outlet and waiting 30 seconds before plugging it back in. The ...
Question about Whirlpool Refrigerators
...refrigerator diagnostic test mode there are 6 diagnostic tests: Defrost Thermostat DiagnosticsRefrigerator Compressor & Condenser Fan DiagnosticsFreezer Evaporator Fan DiagnosticsRefrigerator Sensor ...
...Test Method: 1. Disconnect the refrigerator/freezer from the wall outlet for at least 30 seconds. 2. Turn the thermostat off. 3. Reconnect power to the refrigerator/freezer. Within 3 to 8 seconds the ...
...test it, it would need to be in ice water. When cold it is a closed switch or contacts (checked with a multimeter. When it gets above 50--55 degrees it will open the contacts. Another way, unplug ...
Question about Refrigerators
the thermostat with it and the temperature would slowly drop. Any suggestions? The thermostat reads internal refrigerator temps. A refrigerator should read around 35-38 degrees in refrigerator section
...test the defrost thermostat? The evaporator fan will not run...tested the fan > works, tested the freezer light switch > works. If I connect the defrost thermostat wires together should the fan ...
...Test Method: 1. Disconnect the refrigerator/freezer from the wall outlet for at least 30 seconds. 2. Turn the thermostat off. 3. Reconnect power to the refrigerator/freezer. Within 3 to 8 seconds the ...
refrigerator is not getting cold, either the fridge or freezer compartment. Then it means there is a problem with a part in the unit. Investigate these three areas if frost and ice are forming in your
215 questions posted
Usually answered in minutes!
750 Questions
598 Questions
459 Questions
272 Questions
145 Questions