Sony BRAVIA KDL-40V3000 Television "light blinks times" Questions

...light blinks for about green 4 seconds) after this, the light turns to red and blinks 7 times then stops and then blinks 7 times again. The power/standby light continues to blink red for 7 times I ...

...light blinks three times but tv never comes on When i plug in the tv the stand by light comes on but when you turn on tv the standby light just blinks three times every cop secounds. These blinks are ...

...light blinks 12 times and keeps repeating 12 times with few seconds gap - any suggestion what part failure the 12 blinks represent 12 blinks of standby light indicates 'Scanrate error'. ...

...light blinks 13 times after being switched on. The lower part of the screen briefly lights up then the unit standby light starts flashing These blinks [flashes] are fault indication (Error Codes). ...

light blink please help These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it

Light Blinks 6 times always on failure Hi! I tried to replace my inverter board, with a used board I found online. Not sure if the replacement has an error too, but will try to exchange it. On the old

...light ..shows picture and then a click and 4 red blinking lights Sony Bravia KDL40S2010 parts seem to not be avialable These blinks [flashes] are fault indication (Error Codes). From the number of ...

...light blinks 6 times it has a bad backlite board (the most common with that set) other than that i will need to know how many times in a row it blinks. thanks....techman sony kdl40v2500 power light ...

...light flashes four times then stops then four times again These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about ...

...light blinks 4 times than wait and again 4 times blinks. smells like something heat up on left side. i tried to plug out for few hours than try again it displays and than goes to standby again and ...