CSi Speco Speco DVR-T4IP 4-Channel Triplex Digital Video Recorder with Built-In CD-RW "reset recorder" Questions

...I can't fast forward, pause, stop nothing works until the program that is recording stops. I reset the machine, but it did not help. You need to reset the unit to factory defaults. This is not ...

go to "rec. series" press select. and delete ALL push select... get "ok" message, select again. and reset receiver on front panel of receiver there is a door you can open, hit the red reset button and

After unpluggin receiver, my Dish did not work. Was told to try hard reset, which I tried several times. Could not record, access recorded programs. They are replacing receiver, but suggested I do a ...

...DVR cuts off recorded shows Dish Network ViP 722 DVR keeps cutting the endings off of recordings. Reset the DVR and it "found" the rest of the program recording. Not sure of the reason for the

...recorder There are no subtitles showing when watching live or recorded programs Try switching subtitles Off, then On again. Otherwise a factory reset will normally restore the function. Note that a ...

recorder which keeps freezing the only way to restart the box is switch it off and back on again, i am losing lots of recording with this problem This may help, especially if an update has gone wrong;

my DTR 6400T/6700T has stopped recording The list shows it is not , will not record either manually or pre set to record Factory reset!

...whether you want to record the entire series, you cant accept or decline and have to turn the recorder off from the electricity supply switch to reset the recorder. Any ideas? get version 8 of ...

...If you go into the DVR's Menu/Setup there will be menu selections to "Restart Receiver" and "Reset Receiver" In the reset menu you should find three options "restart receiver" which is roughly ...

...cause the DVR to record one show and not the other. Another trouble shooting step to try is a hard reset by unplugging your receiver for ten seconds then plugging the cord back in. After you have ...