Question about HP PhotoSmart Office Equipment & Supplies
...not print. Deleted printer and re-added to no avail. Any ideas. many times it happens the Cartridge rack get jammed on roller during paper jam.. so please find out the movement of cartridge over the ...
Question about Office Equipment & Supplies
...t budge. Any tips bearing in mind the poor standard of plastic used? Check out the cartridge on the Rack moving completely otherwise clean up the Carriage rack, remove the Cartridge once and then ...
...off then start again. Check it out. Do a complete cleaning of the Toner/Cartridge and the Carriage rack etc. (such as Contact strip, Nozzle,
...cleaning thoroughly, clean its Toner/Cartridge and internal part of Printer viz. Roller, Carriage Rack, and if you wish go for its Service. Let me know in either case, before voting
...rack.. Do a Service of it or get it done by Technician. Also check the feeder tray.. to grab paper one by one by printer.. Manually Take all updates for printer and OS. If your printer doesn't feed ...
Question about Canon Office Equipment & Supplies
it acts like theres no paper in it.. wont feed even though theres paper in the rack.. not sure why try to reinstall your driver. try to do a paper feeding maintenance or roller plate cleaning. Check ...
Question about Sharp Office Equipment & Supplies
repeated paper jams. can open side slide out and remove paper. can we pull rack it is going into? looks like it move green tabs either side, but does not release hot roller assembly. toner tray slid ...
Question about Kyocera Mita Office Equipment & Supplies
Mita all copies have clean, thin, black streaks We have an somewhat older mita copier (don't ask about the model number. I don't know.). All copies have clean, thin, black streaks running vertically. ...
...second sentence print over each other on the same line. I've already cleaned the roller and paper rack. Is there anything else i can do? Under file menu find page setup. Check the margin settings. ...
...rollers by pushing on the little white plastic gears with your finger. They will be tight but you should be able to spin the roller by moving the little gears around. My printer started giving the ...
160 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions