...AC mains wall socket, and re-plug it back after 15 minutes or so. This action will make the TV to a hard reset. If you wish to do a system reset, you have to enter its service mode option. For more ...
...ac cord to make it work again. The sleep timer is always set to off. Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace ...
Question about Apex Digital Televison & Video
...service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective ...
Question about Dynex Televison & Video
...ac to it it had not been on it will not come on has 120vac to it but does nothing Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator ...
Question about Televison & Video
AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]
...blink codes.The power board is always the suspect due to it takes a heavy toll of power.Often capacitors are to blame,look for the ones with a bulged top,replace them.For another blink codes ...
Question about Dynex Televison & Video
AC power, but it didn't help. Here is a link to the service manual--http://www.scribd.com/doc/46056922/KLV-23S200A-and-OtherPage 11 explains the error codes--unless you are a tech with a meter
Question about Televison & Video
...ac cord out hold down power button the plug tv in Fault to the main power supply regulator section. Either it will be on a separate board, or on the part of its main board. Check and replace damaged ...
...AC chord, and switch it ON by its main power switch. the main power regulator section circuit has the fault. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. ...
Question about Televison & Video
AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]
213 questions posted
Usually answered in minutes!
562 Questions
122 Questions
88 Questions
67 Questions
69 Questions