Frigidaire GLTF2940ES Front Load Washer "codes e48" Questions

Frigidaire Affinity ATF8000FS gives me an error code of E48. Stops a few mins after cycle begins I have the same code and problem...E48:Board thinks the PTC circuit is closed. Any help?

i'm getting the blinking locked door light and error code e48 e48 SAYS THAT THE MACHINE DETECTS THAT THE DOOR IS NOT LOCKED.UNPLUG MACHINE FOR 30 MINUTES TO SEE IF IT WILL RESET.iF PROBLEM ...

My fridgidar front load washing machine will not lock to spin my cloths out it shows a code of E48 what does it mean E48 Control detects a problem with the door lock circuit. Unplug the washer. Check ...

code E48 what part do I need Good Morning Gerald, thank you for your question! If you are getting an error code E48, it usually means that the board thinks the door PTC (positive temperature ...

My ATF6000ES Front Loading washer runs on any cycle for about 5 minutes then stops, and the display resets to the start and nothing more happens. Got an E48 code and ran "test 7" and the tub did not ...

Error Code 48 for a GE washer You can find information on the E48 Error code here https://appliancerepairinfo.com/general-electric-ge-washer-error-codes/

Kenmore Ecocycle Front Loading Washers ERR ??? LOC??? Hi, I have a Kenmore Ecocycle Front Loading Washer and I put a load in, put in my detergent etc.... Chose my cycle and pressed start. It beeped 3 ...

no spin i have a frigidaire GLTF2940ESO front loader and we are getting the error e47 E47 and E48 are door lock error codes, also check the wire harness connections too.

my washer won't drain and spin Error code E48, what does this mean? Remove the door lock assy. and check the resistance. If it is shorted or open you need to replace the lock assy. If not then it's ...

...E48 on my GE front load washer you can down load a file to show you how to put your washer into a srevice test mode at appliance aid .com in the washer repair aid section line 7 you will see "GE ...