...power failure. Press STOP/CANCEL to clear the display. "LF" (Long Fill) flashes Are the water inlet hoses kinked or clogged? Are the water inlet valve screens clear? Press STOP/CANCEL to clear the ...
...power switch. Release the buttons. 3. Press the Key button and the red field goes out. Automatic door opening is now deactivated. 4. Press the Start/Stop button to save the setting. If you want to ...
...STOP/CANCEL to clear the display and completely cancel the cycle flashes if the washer loses power during a running cycle. The washer does not flash "PF" when it is first plugged in. Press START to ...
Question about Frigidaire Washing Machines
...starts on a cleaning cycle atrouble code of p5 comes up and the washer stops washing PF - Power Failure - PF error code indicates a power failure during the dryer's cycle. Press and HOLD start to ...
...power pad to turn on press home pad to ensure home screen is displayed 2. Press the help pad. the main help screen is displayed. 3. Press the help and start stop pads for 3 sec simultainiously. The ...
...does not flash "PF" when it is first plugged in. Press START to continue the cycle from the moment that power was lost -OR- Press STOP/CANCEL to clear the display and completely cancel the
Question about Frigidaire Washing Machines
...stop 2 times like it says to, it stopped and door opened. but now, I can't do anything. the power button is still on but no other buttons work. try unplugging and re-plugging. or powering off, ...
...shown. DO NOT PRESS the OK button shown at the bottom of the screen. Press the START/STOP and POWER buttons simultaneously until the Home Screen is displayed. Your unit is ready to function
Question about Washing Machines
...a pop as safety switch operated. 3. reset safety switch. 4. started cycle (i.e. press front panel power button) and washed load as normal. 5. when wash over the door would not open after usual
...power on. Select any Spin position. Press Start and Cancel button at same time again for 3 seconds - other buttons may start to flash - if they do, press Start and Cancel button together again for 3 ...
1,216 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
650 Questions
256 Questions
168 Questions