Frigidaire GLTF2940ES Front Load Washer "washing machine problems mold" Questions

WASHING MACHINE RUBBER FRONT LINER IS COVERED WITH BLACK MOLD AND CONTINES TO COLLECT MOLD DESPITE REPEATED CLEANING. THE SMELL IS TERRIBLE. I have been struggling with the same issue for a long time.

...washing machine open so it has a chance to dry out between wash loads (Don't believe this first line. I have NEVER seen anyone leave their top-loading machine open to dry.) but usually not so with a ...

washing machine and have had a horrilble mold smell for several months. I have used bleach, vinegar, baking soda, cleaned the rubber seal, cleaned the filter trap, bought several different products on

Washing machine has a very bad odor when it starts adding water in for the beginning cycle of washing cloths This is because it is not draining all the way and has mold. You did not post the make and ...

This may wash out mold or mildew stuck in the water lines and pump. If it seems to help, do it again. This is for internal issues. If the problem is external, the machine may just need a good cleaning

washing machine. I did my cloths stink from the washing machine. I did some research and mold and mildew is a big problem with front end loaders. I looked in the manual and there is no mention of this

washing machine door's rubber seal doesn't properly drain, water tis trapped in the seal, and mold develops, causing a strong smell that permeates the clothes after the washing cycle.The cause for the

MOLD I want this machine exchanged or removed from my home! Thanks for nothing! I had the same problem after comming back from Sweden. I put a whole gallon of bleach, then ran a normal wash ( without ...