...the 3.5 mm plug then no, the mic won't need a driver. Your playback and recording devices on your computer DO need drivers. Sounds like a computer config issue to me. Could be a few different ...
Question about MXL Audio Players & Recorders
...of how I assembled the mic to the computer. - Mic cord attached to mic - Mic cord correctly plugged into phantom power supply - Phantom power supply plugged into an electrical outlet and also ...
No volume from Audio-Technica ATM410 Audio-Technica ATM410 plugged into an HP Media Center PC and can't get any volume. Zero volume if plugged into Mic input in front of machine. Extremely low volume ...
...plug mic in? Are you plugging the mic into a computer sound card or some other device? If it's a computer then make sure you use the pink colored jack. Then open the control panel and then click on ...
...plug the mic into my keyboard, turned the mic volume to max, and turned the mic on. Then, I grabbed the part of the mic where the cord goes in, and started turning it. I turned it left and started ...
Question about Audio Players & Recorders
mic plug wiring I have an older Realistic Cardioid Dynamic mic, model #33-992A. It takes a 4 pin plug to hook it up. I have an extra 4 pin plug...but I need to know the pinout for it. I want to use it
Question about Philips Audio Players & Recorders
...to work. So - read the specs on your soundcard. If it doesn't provide 48 volts, then you need to buy a '48 volt phantom power supply' which will plug in between your mic and the
plug your headphones into your computer and get sound that way, assuming your USB mic is plugged in. If the mic is a USB - direct mic (that is, if it is a microphone with a USB cable directly attached
...plug on but you will have to have a phantom power supply for the mic. If you are plugging into a mixer , check to see if it has phantom power (a switch marked as such) and turn it on . Mics that need ...
...plug in mic, load audacity/garageband, or any windows recording application, and ensure the mic input on the application is set to the plugged in logitech/labtec mic. Ensure the input volume is ...
24 questions posted
Usually answered in minutes!
147 Questions
75 Questions
14 Questions
12 Questions