Question about 3Com Baseline Computers & Internet
...factory reset Connect the console cable, open a connection to the serial port via a utility such as PuTTY, and do the following: 1) Enter the user name "recover" and password "recover" to place your ...
...changing IC MAX3387E, but before that would like to confirm if any help. HyperTerminal sucks. Use PuTTY and make sure you have the correct baud rate of 9600 set. Putty Link: ...
Question about 3Com Baseline Computers & Internet
what is the default ip address for powerconnect 5212 By default there isn't one you need to use the serial cable and hook it up the console port and log into it with a terminal program such as hyper ...
Question about 3Com Baseline Computers & Internet
cisco 2900xl switch - can't type anything in console? my 2900 series router won't accept input in putty. i get all the output in the beginning, but once it's finished loading and doing post, it just ...
Question about Linksys Computers & Internet
...software is corrupted There is no reset button on the back if there is console port, connect via putty software and do a command base ...
...You'll need the console cable and physical access. Connect it at 38400/8/n/1 through Hyperterm or Putty or whatever terminal app you have. Press Ctrl+U while the switch is booting From the menu ...
Question about 3Com Baseline Computers & Internet
...Netgear FSM (and GSM) switches have an RS232 serial console port. Connect to that using Hyperterm, PuTTY, Xterm etc. at 9600-8-N-1, and power up the switch. Early in the boot process, it will give ...
...the default, you can reset it using the RS232 serial console port. Connect to that using Hyperterm, PuTTY, Xterm etc. at 9600-8-N-1, and power up the switch. Early in the boot process, it will give ...
Question about 3Com Baseline Computers & Internet
... Netgear FSM (and GSM) switches have an RS232 serial console port. Connect to that using Hyperterm, PuTTY, Xterm etc. at 9600-8-N-1, and power up the switch. Early in the boot process, it will give ...
...gsm7212 Netgear GSM switches have an RS232 serial console port. Connect to that using Hyperterm, PuTTY, Xterm etc. at 9600-8-N-1, and power up the switch. Early in the boot process, it will give ...
24 questions posted
Usually answered in minutes!
2 Questions
12 Questions