Question about 3Com Baseline Computers & Internet
...serial port via a utility such as PuTTY, and do the following: 1) Enter the user name "recover" and password "recover" to place your unit in password recovery mode. The unit will remain in password ...
Question about NetGear Computers & Internet
...recover the passwords and they'll only help if you have a Premium support contract. Try "1234" as this is the default if password protection is enabled. Good luck! Netgear GSM switches have an RS232 ...
Question about 3Com Baseline Computers & Internet
...serial cable - windows xp hyper terminal- shows connected, but I can't type anything.wants to reset the switch with user and password recover. You forget the password for the "admin" user account and ...
Question about EMC Computers & Internet
...serial console port). I don't have IP address of the DS4100B. I don't have its password... How can I reset it to factory default? I am assuming you will still need console connection to do a password ...
Question about 3Com Baseline Computers & Internet
...serial console port. Connect to that using Hyperterm, PuTTY, Xterm etc. at 9600-8-N-1, and power up the switch. Early in the boot process, it will give you a choice of normal operation, or the boot ...
...serial port. Configure the emilator to19200 Baud 8 plus none. Switch the 4924 on and login using the user "recover" (without quotes) and password "recover" (also without quotes. The switch will go ...
...recover the cisco 3750 switch password: 1. Connect your computer to the 3750 switch using the blue serial cable that typically comes with it. Connect the 9-pin d-shell connector to your computer's ...
...serial console port. Connect to that using Hyperterm, PuTTY, Xterm etc. at 9600-8-N-1, and power up the switch. Early in the boot process, it will give you a choice of normal operation, or the boot ...
Question about Adtran Computers & Internet
...recover the password or is there any way that i could connect to the switch. Any suggestions would be greatful, thanks in advance Recovering passwords requires direct physical access to a unit. This ...
...serial console port. Connect to that using Hyperterm, PuTTY, Xterm etc. at 9600-8-N-1, and power up the switch. Early in the boot process, it will give you a choice of normal operation, or the boot ...
24 questions posted
Usually answered in minutes!
2 Questions
12 Questions