176;F during printing and the heater is turned on for 5 seconds with the duty cycle more than 60%. Causes: - Defective fuser thermistor. - Broken thermal cutout or heater lamp. - Defective engine/high
...176;F during printing and the heater is turned on for 5 seconds with the duty cycle more than 60%. 1. Defective fuser thermistor. 2. Broken thermal cutout or heater lamp. 3. Defective engine/high ...
...60176;C within 10 sec. after exceeding 60176;C, it fails to reach 80176;C within 10 sec. . . . after exceeding 180176;C, it fails to reach 195176;C within 10 sec. What does an error code ...
Question about Sharp Office Equipment & Supplies
...60176;C within 10 after it exceeded 40176;C. ? The surface temperature of the fixing upper roller does not reach 80176;C within 10 sec after it exceeded 60176;C. ? The surface temperature of ...
...60176;C or higher. ? If the fixing asssembly temperature is lower than 50176;C after 15 sec from the power-on. If the tempereture remains 220176;C or higher for 0.1 sec or longer. If warm-up is ...
...176;C (60176;F). If none of the steps above correct the issue, the fuser unit or possibly the power supply unit on the printer will need to be replaced. This will require a service action on the ...
...MFC 8440 I SEE ON THE SCREEN ERROR MACHINE 6A I NEED A SOLUTION Error factor: Heater warming-up timeout error. (Heater does not reach 60176;C within 11 sec.) Check: • Thermistor ASSY • Halogen ...
...176;F) First copy time: Max. 2.8 seconds [LTR size, direct copying, Manual Exposure Control, Drawer 1 (top drawer) selected 1?1-sided mode] Copy speed: Direct (100%) LTR 60 cpm 65 cpm (Accelerated ...
97 questions posted
Usually answered in minutes!
192 Questions
143 Questions
118 Questions
97 Questions
55 Questions