Juki DDL-8300 "needle breaks" Questions

breaks on the 2340CV Brother. Doing two needle and the right needle is breaking at the needle. Change needle and retreaded several times Probably depends what that needle is hitting that is causing it

...Needle breaks 1.the needle is damaged 2.the needle is not correctly inserted 3.wrong size needle for the fabric 4.the wrong foot is attached 5.the needle clamp screw is loose 6. Top tension is too ...

...needle breaks. It usually breaks the first time because the needle hits a straight pin, a hard spot in the fabric (like a double seam), or even pulling the fabric while stitching. Once it is out of ...

...needle breaks Is the needle all the way up? Are you sure it's actually hitting the bobbin? It MAY--and quite possibly IS--inserted too low in the needle clamp. Make absolutely sure that it's all the ...

...Needle breaks 1.the needle is damaged 2.the needle is not correctly inserted 3.wrong size needle for the fabric 4.the wrong foot is attached 5.the needle clamp screw is loose 6. Top tension is too ...

...breaks The needle thread breaks 1. The needle thread is not threaded properly 2. The needle thread tension is too tight 3.the needle is bent or blunt 4. The needle is incorrectly inserted into the ...

Needle breaks on my Shark Euro-pro model 361 my Every time I use my Shark Euro-pro model 361 my needle breaks. gone through sooo many needles. Are you inserting the needle fully into clamp? You may ...

...needle breaks I get a horrible grinding sound from the motor then the needle shatters and essentially shrapnel. What is going on? Needle breaks 1.the needle is damaged 2.the needle is not correctly ...

...Needle breaks wrong size needle for fabric wrong foot is attached needle clamp screw is loose also check for lint & pieces of broke needle under the needle plate also the bobbin case area -take ...

...and my bibs in the hoop??? HELP The needle breaks 1. The needle is incorrectly inserted 2. The needle clamp screw is loose 3. The is bent or blunt 4. The needle is too fine for the fabric being ...