Maytag Bravos 7.0 Cu. Ft. Electric Dryer "replace felt seal" Questions

...replace the felt seal the noise should stop. Be sure to use a good grade of adhesive to glue the felt sealing strip to the drum, or follow the instructions with the new felt seal Please take time to ...

replace the drum. Can't just the felt seal be replaced? Find your model number and also, go online and call Samsung. With the model number, go to "SearsParts" and using your model number, type

...felt seal has come off...with that felt seal off their is a great possibility of clothing falling through the gap and damaging the components of the dryer (and ruining your clothing)...it is highly ...

...replace the felt seal on my Kenmore 70 series dryer It is leaving a brown mark on the clothes when I dry them. I can see where the felt is missing in spots on the drum Question moved from Misc ...

...replace rear felt seal what to do any glue needed The felt seal replacement kit should come with some high temp. epoxy to glue the seal back on. The epoxy is quick drying and can be very messy. The ...

replace the felt seal. You could stop there but I recommend that you do the following: Remove the drum and belt and this will expose the drum rollers, idler arm pulley and motor. Now is a good time to

...felt seals will definitely solve the problem and you have to look forward to replacing the same in another 4 years. The seals are sold as pair as you need to replace both but they are cheap and easy ...

...replace the felt seal The felt seal in the back of the dryer drum has come out. Can I replace it from the front doorway? Most felt seals are glued in with a hi temp glue. Without seeing it I can't be ...

...replace the felt seal without buying a whole new drum on a maytag neptune model MDE9700AYW Hello, On older maytag dryer's the felt seal wasa seperate part and not part of the drum..the problem is ...

...felt seal and upper felt seal. Dryer will spin and lock up between the glides and felt seals. it just froze so bad it actually melted some of the seal to the glide. I assume too much friction. Parts ...