...input button on the side of the TV. Press the button, wait 3 second, then press again to go to the next input. This way you will cycle through all of your inputs. If you are using HDMI it is likely ...
...Set Top TV Tuner, etc.) directly to a multi-channel amp and speakers, or (b) from the HDMI output of these devices (DVD, BluRay Disk, Set Top TV Tuner, etc.) into one or both of the TV's HDMI inputs. ...
Question about Televison & Video
input. HDMI or component will give you the best picture. At this point just make sure the TV is set to the same input the box is connected to. If you still see the no signal then the Main board is bad
...set on the TV and there does not appear to be an auto setting for the TV input. Have you called your cable company? There may be an issue or setting with the receiver. I have never experienced this ...
...channel audio, then set your TV to AV1 if connect it to AV input 1,there are two AV input at the back,and also SVideo input, you have to set it by pressing INPUT or TV on remote or button of your
TV is set for say video 3 and nothing is playing on the VCR, the screen will be dark (almost as though the TV is off). Your solution might be as simple as choosing the right external (video) input for
...tv and set it to the corresponding input that you connected to the back of the tv. If your tv does not have a HDMI input then you will not get hi definition tv. You can get digital. If you got a ...
Question about Polaroid Televison & Video
...set the TV to an HDMI input. If you're using components set the TV to component or y/pb/pr to change the input press the input button multiple times this should cycle the inputs for you. If ...
...TV sets have a VGA or DVI input. Use one of these to connect the TV to the monitor output on your computer, or get a DVI to HDMI adapter and go through an HDMI input. If you use the VGA input, you ...
...TV and that the input is set to the one you're using (If you're only using the TV cable input and you're coming from a cable or satellite box then the set should be set to channel 3 or 4 ...
764 questions posted
Usually answered in minutes!
169 Questions
122 Questions
88 Questions
67 Questions
69 Questions