...hits bottom of bowl beaters vibrate and hit side of bowl Your worm gear is no longer seated and that is more than likely because the housing cover is probably the old style plastic and it has cracked ...
Question about KitchenAid Food Mixers
beaters hitting the bottom of the bowl, and can't tighten the screw at the base of the arm any tighter. what to do? beaters hitting the bottom of the bowl, and can't tighten the screw at the base of ...
hits side of bowl I have tried adjusting the screw to lift/lower the beater but it hasn't helped, since it's hitting the side of the bowl, not the bottom. No matter what I do (raise/lower), it
...hits the bottom of the bowl & the adjustment screw doesnt solve the problem. What would cause this and how can I fix the problem? I have the correct beaters according to KitchenAid tech. The flat ...
...mixer beater hit the bowl? The screw which can be seen at the pivot when you tilt the head back needs adjusting. Turn it counterclockwise a bit at a time until the beater no longer hits the
Question about KitchenAid Food Mixers
...hits the bowl, but nothing seems to change. Is this fixable?! I was hoping this would last me a bit longer! More likely the pedestal base is bent. Your local service agent has probably seen it before ...
Question about KitchenAid Food Mixers
plate in the center of the back hits when it goes up. If you screw that into the top so none of it is showing the arms go all the way to the top. Adjust that depending on how your beaters hit the bowl
bowl flies off of base- beaters are hitting the sides of the bowl There should be a turntable offset to avoid contact ofbeaters and bowl. chk the base for a slide lever.
Question about KitchenAid Food Mixers
...hits the bowl, and no adjustment of the bowl lift adjust screw will change this. Any ideas? It actually adjusts *backwards* compared to the instructions. The instructions say turn the screw clockwise ...
Question about KitchenAid Food Mixers
hits bowl beater height adjustment screw does not fix problem Is this a new beater that you just bought? Or is it the same beater you have had? When you adjust the screw, which way are you turning the
42 questions posted
Usually answered in minutes!
493 Questions
357 Questions
285 Questions
205 Questions
183 Questions