2007 Chevrolet Uplander LS Minivan "replace intake manifold gasket" Questions

...replace a intake plenum gasket remove and replace Well basically, you remove the intake plenum and replace the gasket and reinstall the plenum. Here are the steps:1. Disconnect the negative battery ...

...pcv valve going into your intake manifold will cause a gasket to swell. but it should not be to the point where it's noticeable. you should probably replace the intake manifold gasket at this

...replace the intake manifold 3.8L Engine (most common)Upper Intake ManifoldTo Remove: Drain the cooling system. Remove or disconnect the following: Negative battery cable. Fuel injector sight shield. ...

Replace the drain plug once you are finished. Tag all of the electrical wiring and hoses before removing so that reconnection is precise to factory settings. Remove these parts, individually, from the

...replace intake gasket on 1998 olds bravaca 3.8L Engine NOTE The 3.8L (VIN K) non-supercharged engine uses a two-piece intake manifold consisting of an upper air plenum which mounts the throttle body ...

...intake manifold have coolant pasages. The lower intake manifold gasket will need to be replaced. There is an updated manifold gasket, manifold bolts, and torque specification. Call the chevrolet ...

intake manifold. Check all vacuum hoses for cracks or loose connections. Replace any suspect hose. To find manifold gasket leaks, spray ether or carb cleaner on the gaskets with the engine running. If

...REPLACE INTAKE MANIFOLD ON A LINCOLN HOW DO I REPLACE THE INTAKE MANIFOLD ON A 1999 LINCOLN TOWNCAR? answer , very carefully ... drain coolant , remove and mark all vacuum lines , make a schematic to ...