2008 Chevrolet Malibu "cause door unlock switch drivers" Questions

...cause is . The door locks on your vehicle are controlled by a computer ,BCM - body control module . The first test would be to check for DTC'S diagnostic trouble codes in the BCM . An to do this you ...

...and unlocks when car in park. car will however just lock and unlock when car is in motion at random times. what can cause this problem? any help would be great Intermittent door ajar switch

...cause: 1.Disconnect the drivers door lock/unlock switch from the connector. Drive the vehicle and see if your random lock/unlock condition has stopped. If it has, replace the switch. If it hasn't: 2. ...

...door will not unlock the car. Other functions work fine both with the actuator and the passenger door. The doors automatically lock when put in drive and unlock when the key is switched off. I ...

...door unlock has been requested . Door Lock System Components The power door lock system consists of the following components: • Driver door lock switch--Provides a switched voltage signal to the body ...

...door button will unlock and lock. What is causing the issue with the remote and driver side door? Sounds like your remote reciever unit has gone bad. I think you addressed but half of the ...

...door locks will not work The BCM - body control module is what controls the power lock's , disconnecting power can cause some functions to need resetting . Have the BCM checked for DTC'S - diagnostic ...

...Door Unlock Sw and Psgr Door Unlock Sw parameters while using the driver and passenger door lock switches. The parameters should change between Active and Inactive. ?‡' If the values does not change ...

...door switch. Passenger door locks and unlocks with key and manually. Both rear doors only work manually. Rear hatch works with remote, key and inside switch. Do I look inside the driver side or ...

...door unlock function (if programmed). Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections. A factory ...